Materials and products

Every part of a chain link fence, sized to the job.

Mesh, posts, top rail, fittings, and gates for residential, commercial, and contractor projects. Start with the part you need, or send us the whole list.

Ask about materials
01

Chain link fence

Chain link is the workhorse of perimeter fencing. It is open enough to keep sightlines clear, strong enough for security, and simple to install on most ground. Safefence supplies galvanized and PVC-coated mesh in the gauges and heights most projects call for.

Chain link mesh is woven from steel wire into a diamond pattern and then coated for corrosion protection. Galvanized mesh has a zinc coating that protects bare steel for decades in most conditions. PVC-coated mesh adds a vinyl layer over the galvanized wire, which gives a finished colour, a smoother surface, and extra protection in damp or coastal areas. Choose 11 gauge for lighter residential work and 9 gauge where the fence needs more strength, such as commercial yards, sports fields, and high-traffic sites.

  • Backyard and side-yard boundaries
  • Pet and child containment
  • Commercial and industrial perimeters
View chain link fence details
02

Posts

Posts carry the load of the whole fence, so the right size and wall thickness matter as much as the mesh. Safefence supplies galvanized steel posts in the sizes used across residential, commercial, and contractor projects, from light line posts to heavy-duty terminal and gate posts.

Chain link posts are galvanized steel tube or pipe that is set in concrete and carries the mesh, top rail, and tension hardware. Smaller diameters are typically used as line posts between corners and ends, where loads are lower. Larger diameters are chosen for corner, end, and gate posts, where the fence takes the most stress from wind, pulling, and the weight of a gate. Wall thickness runs from 0.060 inch (wall 60) for lighter work up to 0.200 inch (schedule 40) for heavy-duty applications.

  • Line posts along straight fence runs
  • Corner and end posts where the fence changes direction
  • Gate posts for walk and drive gates
View posts details
03

Top rail

Top rail runs along the top of the fence, tying the posts together and keeping the mesh tight and level. Safefence supplies galvanized top rail in the two sizes used across residential and commercial projects, with swaged ends for a clean, secure connection.

Top rail is a galvanized steel tube that runs horizontally between line posts, giving the fence its rigidity and a finished top edge. Residential top rail at 1 3/8 inch is the right choice for most backyard and side-yard fences, where loads are lighter. Commercial top rail at 1 11/16 inch suits larger, heavier-use fences, such as warehouse yards, schools, and sites with more wind exposure. Both sizes come with swaged ends, which are narrowed so the next length slides into the sleeve or coupler and locks into a continuous run.

  • Backyard and side-yard residential fences
  • Commercial and industrial perimeters
  • Sports fields and athletic areas
View top rail details
04

Fittings

Fittings are the small parts that make a chain link fence hold together. They attach the mesh to the posts, the top rail to the line posts, and the tension bars that keep the mesh taut. Safefence supplies the galvanized fittings and hardware used in standard residential and commercial installations.

Chain link fittings include the bands, bars, caps, and ties that complete each post and rail connection. Tension bands hold tension bars to end, corner, and gate posts so the mesh stays tight. Brace bands secure the top rail and brace rails to posts. Tension bars run through the first mesh row and anchor the fabric. Tie wire fastens the mesh to line posts and top rail. Quality galvanized fittings matter because they carry the same loads as the rest of the fence and are the most common place for corrosion to start if the coating is thin.

  • Attaching mesh to posts and rails
  • Securing corners, ends, and gate posts
  • Bracing top rails at posts and corners
View fittings details
05

Gates

A gate is where a fence gets used every day, so it needs solid frame construction and reliable hardware. Safefence supplies walk gates for people and drive gates for vehicles and equipment, with frames and hardware matched to the fence they serve.

Chain link gates are built from galvanized steel frames with the same mesh as the surrounding fence. Walk gates are usually single-swing units in widths from about 3 feet to 5 feet, sized for pedestrian access. Drive gates are typically double-swing pairs that open to clear a driveway, loading area, or service entrance. Frame size, hinge strength, and latch hardware should all match the gate's width and expected use. Heavier, wider gates need more robust posts and hardware, which is why gate posts are usually the largest posts on the fence.

  • Pedestrian entries for homes and yards
  • Vehicle and equipment access for driveways and yards
  • Commercial and warehouse site entries
View gates details